To Next PageTo Next Page
Need help?Do you have a question about the Bosch GST 100 and is the answer not in the manual?
General| Power Source | Corded |
|---|---|
| Stroke Rate | 500 - 3100 spm |
| Stroke Length | 26 mm |
| Weight | 2.1 kg |
| Cutting Capacity in Wood | 100 mm |
| Cutting Depth in Aluminium | 20 mm |
| Cutting Capacity in Steel | 10 mm |
| Cutting Depth in Non-alloyed Steel | 10 mm |
| Bevel Cut | 45° |
| Saw Blade Holder | SDS |
Lists and describes the jigsaw's various controls and components for user interaction.
Presents essential safety guidelines and precautions to ensure secure operation and prevent hazards.
Critical safety instructions to prevent accidents, damage, and ensure proper tool handling.
Step-by-step guide for safely changing saw blades using the SDS system without additional tools.
Instructions for powering the machine on/off, voltage checks, and initial startup procedures.
Explains stroke rate selection, soft start, and constant electronics for optimal cutting performance.
Details connecting an external dust extractor for efficient dust removal during operation.
Details the four-step pendulum action adjustment for optimizing cutting speed and finish.
Guides on adjusting the cutting angle for mitre cuts, up to a maximum of 45 degrees.
Provides practical advice for using the jigsaw, including plunge sawing techniques.
Outlines essential maintenance and cleaning procedures to ensure the tool's longevity and performance.
Information on recycling raw materials and proper disposal of machine components for environmental responsibility.
Details the warranty terms and conditions for Bosch appliances, including coverage and claims.
Provides measured noise and vibration levels, advising the use of ear protection.
Lists service contacts, addresses, and the CE Declaration of Conformity for the product.
