Bosch GBH Professional 2-20 DRE - Page 6

6 | English
1 609 92A 1W0 | (19.7.16) Bosch Power Tools
Mounting and Operation
The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Action Figure Please observe Page
Inserting SDS-plus Drilling Tools
1 62
Removing SDS-plus Drilling Tools
2 62
Selecting the operating mode and
rotation direction
3 63– 64
Changing the chisel position
(Vario-Lock)
4 64
Changing the position of the
auxiliary handle
5 64
Adjusting the drilling depth X
6 65
Mounting the extraction system
(Saugfix)
7 65
Switching on and off and setting
the speed
8 66
Locking-on the On/Off switch
9 66
Releasing the On/Off switch
10 66
Selecting Accessories
– 67
X
OBJ_BUCH-1333-005.book Page 6 Tuesday, July 19, 2016 2:55 PM