To Next PageTo Next Page
Need help?Do you have a question about the Bosch GBH Professional 3-28 DFR and is the answer not in the manual?
General| Power | 800 W |
|---|---|
| Impact Energy | 3.2 J |
| Drilling Diameter in Concrete | 28 mm |
| Drilling Diameter in Steel | 13 mm |
| Drilling Diameter in Wood | 30 mm |
| No-load Speed | 0 - 900 rpm |
| Tool Holder | SDS plus |
| Optimum range of application in concrete with hammer drill bits | 4 - 16 mm |
| Drilling diameter in concrete with core cutters | 68 mm |
| Impact Rate | 0-4000 bpm |
Read all safety warnings and instructions. Failure to follow may result in electric shock, fire and/or serious injury.
Keep work area clean and well lit. Do not operate in explosive atmospheres. Keep children and bystanders away.
Ensure plugs match outlets, avoid body contact with earthed surfaces, protect from rain/wet, do not abuse the cord.
Stay alert, use common sense, wear personal protective equipment (eye protection, etc.).
The machine is intended for hammer drilling in concrete, brick, stone, and light chiselling work.
Measured sound values determined according to EN 60745. Wear hearing protection!
Information on selecting and using SDS-plus and other tools with the machine.
Observe correct mains voltage. Set the operating mode with the mode selector switch 9.
Information on the safety clutch and how to react if the tool insert becomes caught.
