To Next PageTo Next Page
Need help?Do you have a question about the Bosch GBH 36 VF-Li Professional and is the answer not in the manual?
General| Input power | 600 W |
|---|---|
| Power source | Battery |
| Battery voltage | 36 V |
| Impact rate | 4260 bpm |
| Rated speed (max) | 960 RPM |
| Impact energy (max) | 2.8 J |
| Drilling diameter in wood (max) | 30 mm |
| Drilling diameter in steel (max) | 13 mm |
| Drilling diameter in concrete (max) | 26 mm |
| Reverse | Yes |
| Product color | Black, Blue, Red |
| Vibration emission | 20 m/s² |
Weight and Dimensions| Depth | 396 mm |
|---|---|
| Width | 107 mm |
| Height | 221 mm |
| Weight | 4500 g |
Read all warnings and instructions. Failure to follow may result in electric shock, fire, or serious injury.
Proper disposal of power tools, batteries, accessories, and packaging for environmental recycling.
Use the correct tool, do not force, disconnect before adjustments, and maintain tools properly.
Use specified chargers, use only designated battery packs, and keep away from metal objects.
Have power tools serviced by qualified personnel using identical replacement parts.
Machine is intended for hammer drilling in concrete, brick, stone, and light chiselling work.
Article number for Rotary Hammer GBH 36 V-LI and GBH 36 VF-LI Professional.
Indicates speed control feature for Rotary Hammer models.
Indicates stop rotation feature for Rotary Hammer models.
Measured sound values determined according to EN 60745. Wear hearing protection.
Use only original Bosch chargers. Charge fully before first use. Charging can be interrupted.
Battery has two locking levels to prevent accidental removal. Follow steps to remove.
Three green LEDs indicate charge status. Check status by pushing button 16.
Always operate with the auxiliary handle. Change position for secure and low-fatigue posture.
Mount and remove key type drill chuck for tools without SDS-plus.
Remove and insert SDS-plus or keyless chucks for GBH 36 VF-LI.
Easily change SDS-plus tools without additional tools. Insert tool until latched.
Push back locking sleeve 5 and remove the tool.
Do not use for hammer drilling or chiselling. Use key type drill chuck.
Turn chuck key anticlockwise to remove tool.
Do not use for hammer drilling or chiselling. Insert quick change keyless chuck 1.
Attach dust extraction attachment to auxiliary handle. Connect extraction hose.
Adjust drilling depth X with dust extraction attachment mounted. Loosen wing bolt 30.
Insert battery and ensure tool is off before starting.
Use correct Bosch Li-ion batteries. Insert battery fully until locked.
Change mode only when tool is off. Push release button 10 and turn mode selector switch 11.
Chisel can be locked in 36 positions for optimum working posture.
Apply tool to screw when off. Use universal bit holder 32 with SDS-plus shank.
Protect battery against moisture. Store between 0-50°C. Clean venting slots. Replace if working period is significantly reduced.
Remove battery before work. Keep machine and vents clean. Change dust cap if damaged.
Contact service for maintenance, repair, spare parts. Exploded views available online.
Contact details for Robert Bosch Ltd. (B.S.C.) in Great Britain.
Contact details for Origo Ltd. in Ireland.
Contact details for Robert Bosch Australia Pty. Ltd.
Contact details for customer service and BSC Service Centres in South Africa.
Contact details for Bosch Headquarters in Midrand, Gauteng.
