To Next PageTo Next Page
Need help?Do you have a question about the Bosch GBH18V-26D and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Impact Energy | 2.6 ft-lbs |
| Chuck Type | SDS-plus |
| Max. Drilling Diameter in Metal | 13 mm |
| Max. Drilling Diameter in Wood | 30 mm |
| Battery Type | Li-ion |
| Drilling Capacity (Wood) | 30 mm |
| Drilling Capacity (Steel) | 13 mm |
| No-load Speed | 0-890 RPM |
| Impact Rate | 0 – 4, 350 bpm |
| Rated Speed | 0 – 890 rpm |
| Drilling Diameter in Concrete with Hammer Drill Bits | 26 mm |
| No Load Impacts Per Minute | 0 – 4, 350 bpm |
| Drilling Capacity (Concrete) | 26 mm |
Ensures safe operation by maintaining a clean work area and keeping distractions away.
Details precautions to prevent electric shock when using power tools, especially in wet conditions.
Emphasizes staying alert and using common sense for safe operation.
Guidelines for proper usage, maintenance, and care of power tools to ensure safety and longevity.
Instructions for safe charging, usage, and storage of battery packs and tools.
Instructions for inserting and removing the battery pack from the tool.
Steps for cleaning, inserting, and securing SDS-plus accessories into the chuck.
Procedure for safely removing SDS-plus accessories, noting they may be hot.
Instructions for attaching and detaching the optional 3-jaw chuck accessory.
Guidance on inserting and securing bits using the 3-jaw chuck, including tightening procedure.
How to adjust and secure the auxiliary handle for better control and positioning.
Instructions for setting and adjusting the depth gauge for controlled drilling depth.
Explanation of the variable speed trigger for controlling tool speed from 'ON' to 'OFF'.
How to use the lever to change rotation direction and lock the trigger for safety.
Description of the mode selector dial and its settings for different applications.
Instructions for using the Vario-Lock feature with chipping bits for optimal positioning.
Explanation of the internal slip clutch that stops output if the accessory binds.
Details on the kickback control feature that automatically shuts off the tool.
Practical advice and tips for efficient tool usage, bit maintenance, and material drilling.
Specific guidance for drilling wood or plastic, including pressure and bit withdrawal.
Techniques for drilling metal, including center punching, pressure, and lubrication.
Guidance on drilling masonry materials using appropriate bits and pressure.
Information on professional servicing, emphasizing qualified personnel and genuine parts.
Guidance on recognizing end-of-life battery packs and the importance of timely replacement.
Confirmation that the tool has been properly lubricated and is ready for use.
Information about the tool's DC motor, its engineering, and recommended periodic examination.
Precautions and advice on cleaning the tool, including warnings about certain cleaning agents.
