-19-
page headingOperating Instructions
Status Indications
Power tool status (27) Meaning/cause Solution
Green Status OK –
Yellow Critical temperature has been
reached or rechargeable battery
is almost empty
Allow the power tool to cool down, or
replace or charge the battery
Red Power tool has overheated or
rechargeable battery is empty
Allow the power tool to cool down, or
replace or charge the battery
Red Motor is jammed, battery too weak Charge the battery or use the recom-
mended battery type
General error – Turn the power tool off and on again,
or remove the battery and reinsert it
If the error persists:
– Send the power tool to the after-
sales service
Flashing red Kickback control is triggered Turn the power tool off and on again
Flashing blue Power tool is connected to a mobile
device via Bluetooth®
or
settings are being transferred
–
Battery charge indicator
(user interface) (20)
Meaning/cause Solution
Green (2 to 5 bars) Battery charged –
Yellow (1 bar) Battery almost empty Replace or charge battery soon
Red (1 bar) Battery empty Replace or charge battery
(21)
(27)
(23)
(22)
(20)
(25)
(26)
(6)
(24)
User Interface
(Fig. 14)
The user interface 6 is used to select the work-
ing mode and to indicate the status of the power
tool.
Fig. 14
160992A8B9 GBH18V-28C 20230316.indd 19 3/16/23 4:08 PM
To Next Page
Loading...
