9
Specifications
Drilling Capacity
* with 1 in. dust intake ring
** with Extension for dust intake ring
Drilling diameter 5/8" to 1" (16mm to 26mm)*
Maximum drill bit length 10" (260mm)**
Maximum drilling depth 3.9â (100 mm)
Battery Packs / Chargers:
Please refer to the battery/charger list, included with your tool.
Disconnect the
hammer drill from
power source before making any
assembly, adjustments or changing
accessories. Remove battery pack from
dust collector unit before assembly.
Such preventive safety measures reduce
the risk of starting the tool accidentally.
î Inserting And Releasing
Battery Pack
Do not use force to insert the battery.
The battery is designed in such a way
that it can only be inserted into the
vacuum cleaner when it is in the right
position.
To insert battery:
- slide the battery 15 into the battery
holder on the dust collector unit 1
until it clicks in place (Fig. 2).
To remove battery:
- press battery release button 16 and
slide the battery 15 out of battery
holder on the dust collector unit 1 as
shown in Fig. 2.
Assembly
To Next Page
