16 | English 2 609 140 411 • 11.6.07
For easy adjustment of the sanding sheet 5 to the
sanding plate 4, use the adjustment aid in the tool
case as shown in the following figure. Place the sand-
ing sheet into the adjustment aid with the Velcro fac-
ing upward and firmly push on the machine with the
sanding plate.
Selecting the Sanding Sheet
Depending on the material to be worked and the required rate of material removal, different sanding sheets are
available:
Material Application Grain size
–Paint
–Varnish
– Filling compound
– Filler
For sanding off paint coarse 40
60
For sanding primer (e. g., for removing brush dashes,
drops of paint and paint run)
medium 80
100
120
For final sanding of primers before coating fine 180
400
– All wooden materials
(e. g., hardwood, soft-
wood, chipboard, building
board)
–Metal materials
For coarse-sanding, e. g. of rough, unplaned beams
and boards
coarse 40
60
For face sanding and planing small irregularities medium 80
100
120
For finish and fine sanding of wood fine 180
240
320
400
– Masonry, stone
–Marble
–Granite
–Ceramic
–Glass
–Plexiglas
– Automotive paint
–Corian®
–Varicor®
For pre-sanding coarse 60
For shaping and braking edges medium 80
100
120
For final sanding and forming fine 180
240
320
400
For polish-sanding and rounding off edges very fine 600
1200
OBJ_BUCH-315-002.book Page 16 Monday, June 11, 2007 12:59 PM
To Next Page
Loading...
