Bosch GHG 660 LCD Professional - Noise Information; Declaration of Conformity; Product Features; Technical Data

English | 15
Bosch Power Tools 1 609 929 L85 | (23.1.08)
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Standing surface
2 Cover with coarse-debris filter
3 On/Off switch with stage selector
4 Nozzle
5 Heat protection collar
6 Program-selection button
7 Display
8 Button for air-flow control
9 Button for temperature control
10 Save button
11 Wide jet nozzle*
12 Glass protection nozzle*
13 Reflector nozzle*
14 Welding rod*
15 Welding shoe*
16 Reduction nozzle*
17 Heat-shrinkable sleeve*
18 Angle nozzle*
*The accessories illustrated or described are not in-
cluded as standard delivery.
Noise Information
Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is less than 70 dB(A).
Declaration of Conformity
We declare under our sole responsibility that the
product described under “Technical Data” is in
conformity with the following standards or
standardization documents: EN 60335 according
to the provisions of the directives 2006/95/EC,
2004/108/EC.
03
05.10.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Technical Data
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
Hot Air Gun GHG 660 LCD
Professional
GHG 660 LCD
Professional
Article number
0 601 944 7.. 0 601 944 7..
Rated voltage
V 220–240 110–120
Rated power input
W23001400
Air flow
l/min 250–500 250–500
Temperature at the nozzle outlet (approx.)
°C 50–660 50–600
Temperature-measuring accuracy
– at the nozzle outlet
– on the display
±5%
±5%
± 5%
± 5%
Display operating temperature*
°C –20...+70 –20...+70
Weight according to EPTA-Procedure 01/2003
kg 1.0 1.0
Protection class
/II /II
* The display can turn black when not within the operating temperature.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.
OBJ_BUCH-485-001.book Page 15 Wednesday, January 23, 2008 12:48 PM