English | 17
Bosch Power Tools 1 609 929 N12 | (11.1.08)
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Depth adjustment knob
2 Chip ejector (alternatively right/left)
3 Storage compartment for planer blade/
Allen key
4 Planing depth scale
5 Safety switch for On/Off switching
6 On/Off switch
7 Belt cover
8 Screw for belt cover
9 Chip ejection selector lever
10 Planer base plate
11 V-grooves
12 Blade drum
13 Clamping element for blade
14 Fastening screw for planer blade
15 Carbide blade (TC)
16 Lateral blade-shaft protector
17 Allen key
18 Extraction hose (
Ø 35 mm)*
19 Chip/dust bag*
20 Parallel guide*
21 Scale for rebating width
22 Locking nut for adjustment of rebating width
23 Fastening bolt for parallel and beveling guide
24 Angle stop*
25 Locking nut for angle adjustment
26 Fastening bolt for rebating depth stop
27 Rebating depth stop*
28 Park rest
29 Service station*
30 Drive belt
31 Large pulley
32 Small pulley
*The accessories illustrated or described are not in-
cluded as standard delivery.
Technical Data
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 85 dB(A); Sound
power level 96 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
=5.5 m/s
2
, Uncertain-
ty K =1.5 m/s
2
.
The vibration emission level given in this informa-
tion sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another. It
may be used for a preliminary assessment of ex-
posure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly
increase the exposure level over the total work-
ing period.
Planer GHO 40-82 C
Professional
Article number
0 601 59A ...
Rated power input
W 850
Output power
W 450
No-load speed
rpm 14000
Planing depth
mm 0 – 4.0
Rebating depth
mm 0 – 24
Planing width, max.
mm 82
Weight according to
EPTA-Procedure 01/2003
kg 3.2
Protection class
/II
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
OBJ_BUCH-633-001.book Page 17 Friday, January 11, 2008 8:09 AM
To Next Page
Loading...
Need help?
General