To Next PageTo Next Page
Need help?Do you have a question about the Bosch GKT 55 GCE and is the answer not in the manual?
General| Power input | 1400 W |
|---|---|
| Saw blade diameter | 165 mm |
| Saw blade bore diameter | 20 mm |
| Cutting depth (90°) | 57 mm |
| Cutting depth (45°) | 42 mm |
| Weight | 4.7 kg |
| No-load speed | 3600 – 6250 rpm |
Read all safety warnings and instructions. Failure to follow may result in electric shock, fire, or serious injury. Save all warnings.
Use correct plugs and outlets. Avoid earthed surfaces and wet conditions. Do not abuse cord. Use outdoor extension cords and RCDs.
Stay alert. Use PPE. Prevent unintentional starting. Remove adjusting keys. Do not overreach. Dress properly. Use dust extraction.
Keep hands away from blade. Do not reach under workpiece. Adjust depth. Secure workpiece. Hold securely. Use rip fence or straight edge.
Understand kickback. Maintain firm grip and resist forces. Release trigger when binding. Restart carefully. Support panels. Use sharp blades. Secure adjustments. Use caution in blind areas.
Check guard closing and return spring. Ensure base plate stability during plunge cuts. Ensure guard covers blade when placing down.
Step-by-step guide for removing and installing the saw blade, including safety measures.
How to set the cutting depth to match the workpiece thickness using the indicator and slider.
Instructions for setting bevel and mitre angles using wing bolts and specific buttons.
Procedure for switching the tool on and off, and checking mains voltage compatibility.
Instructions for using the guide rail for straight cuts, including the splinter guard and rubber lip adaptation.
