12 | English
1 609 92A 3MW | (21.11.16) Bosch Power Tools
f Battery low indicator
g Temperature warning
h Error message “Error”
Assembly
Inserting/Replacing the Batteries
Using alkali-manganese or rechargeable batteries is
recommended for operation of the measuring tool.
With 1.2-V-rechargeable batteries fewer measure-
ments could be possible than with 1.5-V-batteries.
To open the battery lid 3, press the latch 4 and re-
move the battery lid. Insert the batteries/rechargea-
ble batteries. When inserting, pay attention to the
correct polarity according to the representation on
the inside of the battery compartment.
When the battery symbol appears for the first
time on the display, measurements are possible for
approx. another 15 minutes.
When the battery symbol flashes, the batteries/
rechargeable batteries must be replaced. Measure-
ments are no longer possible.
Always replace all batteries/rechargeable batteries at
the same time. Do not use different brands or types of
batteries/rechargeable batteries together.
OBJ_BUCH-3062-001.book Page 12 Monday, November 21, 2016 4:09 PM
To Next Page
Loading...
