12 | English
1 609 92A 3WU | (12.6.17)
Bosch Power Tools
Fasteners contacting a “live” wire
may make exposed metal parts of
the power tool “live” and could give
the operator an electric shock.
Hold the machine with a firm grip.
High reaction torque can briefly
occur while driving in and loosening
screws.
Secure the workpiece. A workpiece
clamped with clamping devices or in
a vice is held more secure than by
hand.
Always wait until the machine has
come to a complete stop before
placing it down. The tool insert can
jam and lead to loss of control over
the power tool.
Before any work on the machine
(e. g., maintenance, tool change,
etc.) as well as during transport
and storage, set the rotational di-
rection switch to the centre posi-
tion. Unintentional actuation of the
On/Off switch can lead to injuries.
Protect the power tool
against heat, e. g., against
continuous intense sun-
light, fire, water, and mois-
ture. Danger of explosion.
In case of damage and improper
use of the battery, vapours may be
emitted. Ventilate the area and
seek medical help in case of com-
plaints. The vapours can irritate the
respiratory system.
OBJ_BUCH-3206-001.book Page 12 Monday, June 12, 201
To Next Page
Loading...
Need help?
General
