Do you have a question about the Bosch GSB 12 VE-2 and is the answer not in the manual?
Number of gears | 2 |
---|---|
Screw diameter (max) | 8 mm |
Drilling diameter in wood (max) | 35 mm |
Drilling diameter in concrete (max) | 13 mm |
Soft grip | Yes |
Product design | Pistol grip drill |
Power source | Battery |
Battery voltage | 12 V |
Weight | 2700 g |
---|
Detailed technical specifications for GSR and GSB cordless screwdrivers and impact drills, including speed, torque, and capacity.
Specifications for NiCd and NiMH battery packs, including voltage, capacity, and weight for different models.
Identification and description of the various parts and elements of the cordless screwdriver/impact drill.
Defines the specific applications for GSR (screwdriving/drilling) and GSB (impact drilling) models.
Essential safety guidelines for operating the power tool safely, including personal protection.
Instructions for inserting, removing, and charging the battery pack for optimal performance and life.
Guidance on how to adjust and secure the auxiliary handle for improved control and stability.
Procedure for inserting and removing bits and accessories into the keyless chuck.
Instructions on how to safely start and stop the machine using the On/Off switch.
How to set and adjust the torque control ring for various screwdriving applications.
Setting the torque ring for drilling or impact drilling modes (GSB models).
Using the gear selector for speed/power and the switch for rotational direction.
Steps for loosening, tightening, and replacing the drill chuck and its locking screw.
Advice on using the soft grip for better handling and general tips for effective use.
Procedure for replacing worn carbon brushes to maintain tool functionality.
Guidelines for recycling the machine, accessories, and battery packs responsibly.
Measured noise and vibration levels according to EN standards, with recommendations for hearing protection.
Contact information for service, advice, and support in various regions.
Statement of compliance with relevant directives and standards for the product.