To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GSR 12V-30 and is the answer not in the manual?
General| Battery Voltage | 12 V |
|---|---|
| Max. Torque (hard/soft) | 30/18 Nm |
| Chuck Capacity | 0.8 - 10 mm |
| Max. Screw Diameter | 8 mm |
| Max. Drilling Diameter in Wood | 20 mm |
| Max. Drilling Diameter in Steel | 10 mm |
| Torque Settings | 20 + 1 |
| Max. Torque Soft Joint | 18 Nm |
| Max. Torque Hard Joint | 30 Nm |
| Battery Type | Li-ion |
| Battery Capacity | 2.0 Ah |
| Chuck Type | Keyless chuck |
Read all safety warnings and instructions for safe operation.
Ensures a safe working environment by maintaining a clean and well-lit area.
Guidelines to prevent electric shock, including plug and cord safety.
Measures for operator protection, including alertness and PPE.
Instructions on proper usage, maintenance, and storage of power tools.
Guidance on charging, handling, and safety precautions for battery-powered tools.
Information on qualified repair and maintenance for power tools.
Specific safety precautions for operating drills and screwdrivers.
Identifies and describes the various components of the power tool.
Procedure for safely detaching the battery pack from the tool.
Instructions for quickly and easily changing the drill chuck application tool.
Guidance on inserting the battery and preparing the tool for use.
How to change the tool's rotational direction for drilling or driving.
Selecting the correct mode for drilling, screwdriving, or impact drilling.
Adjusting the torque setting ring for precise screw driving and overload protection.
Choosing between two speed ranges for optimal performance based on the task.
How to start and stop the power tool using the trigger switch.
Controlling the tool's speed by varying the pressure on the on/off switch.
Adjusting speed and impact rate for the GSB model via trigger pressure.
Keeping the tool and ventilation slots clean for safe and efficient operation.
