EasyManua.ls Logo

Bosch Professional GSR 12V-30 - Product Description and Specifications; Product Features; Technical Data

Bosch Professional GSR 12V-30
213 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 | English
u Only use the battery with products from the manufac-
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g.
against continuous intense sunlight, fire,
water and moisture. There is a risk of explo-
sion.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic. The GSB
is also designed for impact drilling in brick.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Tool holder
(2)
Keyless chuck
(3)
Torque presetting ring
(4)
Mode selector switch (GSB 12V-30 only)
(5)
Gear selector switch
(6)
Rotational direction switch
(7)
Battery release button
A)
(8)
Battery
A)
(9)
Handle (insulated gripping surface)
(10)
On/off switch
(11)
Battery charge indicator
(12)
“PowerLight”
(13)
Screwdriver bit
A)
(14)
Universal bit holder
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless screwdriver GSR 12V-30 GSB 12V-30
Article number
3 601 JG9 0.. 3 601 JG9 1..
Rated voltage V = 12 12
No-load speed
First gear rpm 0–420 0–420
Second gear rpm 0–1600 0–1600
Impact rate 0–24000
Maximum torque, hard/soft screwdriving application ac-
cording to ISO 5393
Nm 30/18
A)
30/18
A)
Max. drilling diameter
Masonry mm 8
Steel mm 10 10
Wood mm 20 20
Max. screw diameter mm 8 8
Weight according to EPTA-Procedure 01:2014 kg 0.90 1.0
Permitted ambient temperature
during charging °C 0 to +45 0 to +45
during operation
B)
and during storage °C -20 to +50 -20 to +50
Recommended batteries GBA 12V.. GBA 12V..
Recommended chargers AL 11.. CV
GAL 12.. CV
GAL 12V-..
GAX 18V-30
AL 11.. CV
GAL 12.. CV
GAL 12V-..
GAX 18V-30
A) Depends on battery in use
B) Limited performance at temperatures <0°C
1 609 92A 4E7 | (21.11.2018) Bosch Power Tools

Related product manuals