To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSR 10,8 V-LI Professional and is the answer not in the manual?
General| Voltage | 10.8 V |
|---|---|
| Battery Type | Li-Ion |
| Max Torque | 30 Nm |
| Drill diameter in steel, max. | 10 mm |
| Chuck capacity, min | 1 mm |
| Chuck capacity, max | 10 mm |
Ensures a clean, well-lit workspace and keeps children and bystanders away from the operating area.
Details on matching plugs, avoiding earthed surfaces, protecting from rain/wet, and cord safety.
Emphasizes staying alert, using PPE, preventing unintentional starts, and proper attire.
Guidance on not forcing the tool, maintaining it, keeping tools sharp, and correct usage.
Instructions on charging, using specific battery packs, and handling potential battery leaks.
Recommends using qualified repair personnel and identical replacement parts for safety.
Covers holding the machine correctly, securing workpieces, avoiding asbestos, and dust protection.
Defines the tool's purpose for driving screws and drilling in various materials.
Lists and describes the numbered components of the power tool.
Provides measured sound pressure and vibration emission values according to EN 60745.
Instructions on using the correct charger and initial charging of the lithium-ion battery.
Guidance on inserting the battery and setting the rotational direction switch for safe startup.
Steps for correctly inserting the battery pack into the tool handle.
How to change the tool's rotation direction for drilling or driving screws.
Explanation of the torque presetting ring for selecting 10 different torque steps.
Instructions on how to start and stop the power tool's operation.
Details on how variable speed is controlled by pressure on the On/Off switch.
Describes the spindle locking feature when the switch is not pressed.
Explains speed reduction or shutdown due to high load or battery temperature.
Details the 'Electronic Cell Protection' that prevents battery damage from deep discharge.
General advice on applying the tool to screws and handling the soft grip.
Information on the case's capacity and how it can be hung using the utility clip.
Provides advice on using HSS drill bits and predrilling pilot holes for screws.
Guidance on cleaning the machine, tool holder, and ventilation slots for optimal performance.
Information on obtaining support, spare parts, and customer service contact details.
Instructions for environmentally friendly disposal and recycling of Li-ion batteries.
