To Next PageTo Next Page
Need help?Do you have a question about the Bosch GOL 24 and is the answer not in the manual?
General| Laser Class | Class 2 |
|---|---|
| Self-Leveling Range | ± 4° |
| Operating Temperature | -10 °C to +50 °C |
| Dust and Splash Protection | IP54 |
| Tripod Thread | 5/8" |
| Laser Wavelength | 635 nm |
| Protection Class | IP54 |
| Working Range | Up to 30 m |
| Battery Type | 4 x AA |
| Operating Time | Approx. 30 hours |
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Stay alert, watch what you are doing and use common sense when operating a tool.
Use the correct tool for your application. Store idle tools out of reach of children.
Have your tool serviced by a qualified repair person using only identical replacement parts.
This tool is intended to quickly determine and check level points for any construction job.
Verify the calibration of the instrument before initial use.
Lists the numbered product features shown on the graphic page.
Verify calibration, protect from moisture, avoid extreme temperatures and impacts.
Focus cross hairs and telescope by adjusting eyepiece and focusing knob.
Read the rod at the horizontal hair for height; use stadia hairs for distance.
Check compensator operation and center the circular bubble vial.
Test for horizontal accuracy by sighting two rods at different distances.
Wipe clean, remove dust with soft brush, store in dust-free area.
Repair by an authorized after-sales service center for Bosch measuring tools.
Recycle raw materials, batteries, and packaging according to regulations.
