-2-
Safety Symbols
1 Work area safety
a. Keep work area clean and well lit.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust.
c. Keep children and bystanders away
while operating a power tool.
2 Electrical safety
a. Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools.
b. Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
c. Do not expose power tools to rain or
wet conditions.
d. Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts.
e. When operating a power tool outdoors,
use an extension cord suitable for outdoor
use.
f. If operating a power tool in a damp
location is unavoidable, use a Ground
Fault Circuit Interrupter (GFCI) protected
supply.
3 Personal safety
a. Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power tool
while you are tired or under the inuence of
drugs, alcohol or medication.
Read all safety warnings, instructions, illustrations and specifications
provided with this power tool. -
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
General Power Tool Safety Warnings
16099221RZ_GOP18V-34_202303.indd 216099221RZ_GOP18V-34_202303.indd 2 3/17/2023 8:21:32 AM3/17/2023 8:21:32 AM