To Next PageTo Next Page
Need help?Do you have a question about the Bosch GPL3 and is the answer not in the manual?
General| Leveling Type | Self-Leveling |
|---|---|
| Power Source | 3 x AA batteries |
| IP Rating | IP54 |
| Laser Diode | 635 nm |
| Laser Class | Class II |
| Range | 30 m |
| Operating Temperature | 14°F to 122°F (-10°C to 50°C) |
| Weight | 0.5 lb (0.23 kg) |
Advises on laser radiation hazards, including not staring into the beam and proper handling.
Details safe operation, including informing bystanders, secure positioning, and using approved accessories.
Describes the tool's purpose: projecting plumb and horizontal points for accurate alignment and transfer.
Step-by-step guide for opening the battery compartment, inserting batteries, and closing the lid.
Details the automatic leveling process, its range, and how to handle situations where it is not possible.
Step-by-step guide to check the horizontal accuracy of the laser beam over a specific distance.
Step-by-step guide to verify the vertical accuracy (plumb) of the laser beam between two points.
Continues the procedure for checking vertical accuracy, including measurements and allowable deviation.
Detailed instructions for recalibrating the front laser beam, involving marking and checking points on vertical surfaces.
Continues the front beam recalibration process, focusing on adjusting the beam using calibration screws.
Instructions for recalibrating the top and bottom laser beams, involving floor and ceiling marks.
