-9-
Battery Packs / Chargers:
Please refer to the battery/charger list, included with your tool.
NOTE: For tool specifications refer to the nameplate on your tool.
Model Number GSA18V-110
Voltage rating 18 V
No load speed 0-2,900
Stroke length 1.10” (28mm)
Permitted battery temperature during charging +32…+113°F (0…+45°C)
Permitted ambient temperature during operation and storage -4…+122°F (-20…+50°C)
Recommended ambient temperature during charging +32…+95°F (0...+35°C)
Specifications
Use this reciprocating saw only as intended. Unintended use may result
in personal injury and property damage.
The power tool is suitable for sawing wood, plastic, metal and building materials on a firm sur-
face. It is suitable for straight and curved cuts. When using designated suitable bimetal saw
blades, flush cutting is also possible. The saw blade’s recommendations are to be observed.
Intended Use
Assembly
Disconnect battery pack from tool before making any assembly, adjust-
ments or changing accessories. Such preventive safety measures reduce
the risk of starting the tool accidentally.
Blade Selection
No one blade can be efficient on all cutting
jobs. Different materials require specially
designed blades. Since your reciprocating
saw can cut so many materials, many types
of Bosch blades are available. Be sure to use
the proper blade to ensure proper cutting
performance.
Installing and Removing a Blade
Make sure that the front
end of the blade extends
through the footplate for the entire stroke
length. Do not use specialty blades that are
very short or those with a significant bend.
Blade must not contact footplate. A blade
which is too short or tilted could jam inside
the foot and snap.
GSA18V-110 202206.indd 9 8/17/22 8:24 AM
To Next Page
Loading...
