To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSH 11 VC Professional and is the answer not in the manual?
Safe operation requires a clean, well-lit work area, free from flammable substances.
Protect against electric shock with proper grounding, avoiding wet conditions, and using undamaged cords.
Maintain alertness, use PPE, avoid unintentional starts, and ensure proper balance and attire.
Use the correct tool, ensure the switch functions, and disconnect power before adjustments.
Ensure tool safety by using qualified repair persons and identical replacement parts.
Wear ear protectors as noise exposure can cause hearing loss.
Use supplied auxiliary handles for better control and to prevent personal injury.
Hold tool by insulated surfaces to prevent electric shock from live wires.
Verify mains voltage and check for hidden utility lines to prevent fire, shock, or explosion.
Firmly tighten auxiliary handle, maintain footing, and secure workpiece for safe operation.
Insert SDS-max tools and check latching by pulling to ensure secure fit.
Maintain dust protection and be aware of health hazards from material dusts.
Declared vibration emission level for main applications, measured per EN 60745.
Guide to inserting SDS-max tools, changing chisel position, adjusting handle, and switching.
Keep machine and ventilation slots clean for safe and proper working.
Service indicator warns of worn carbon brushes or machine defects.
Contact after-sales service for maintenance, repair, spare parts, and product application questions.
General| Input power | 1700 W |
|---|---|
| Power source | AC |
| Impact rate | 1700 bpm |
| Impact energy (max) | 23 J |
| Weight (including battery) | 11400 g |
| Carrying case | Yes |
Weight and Dimensions| Depth | 680 mm |
|---|---|
| Height | 236 mm |
