To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSH 16-28 and is the answer not in the manual?
General| Impact energy (max) | 41 J |
|---|---|
| Vibration level (chiseling) | 10 m/s² |
| Toolholder | 28 mm |
| Impact rate | 1300 bpm |
| Input power | 1750 W |
| Soft grip | Yes |
| Product color | Black, Blue |
Weight and Dimensions| Width | 255 mm |
|---|---|
| Height | 760 mm |
| Weight | 17900 g |
Read all safety warnings and instructions. Failure to follow may result in electric shock, fire and/or serious injury.
Keep work area clean and well lit. Do not operate in explosive atmospheres. Keep children and bystanders away.
Ensure plugs match outlets. Avoid body contact with earthed surfaces. Do not expose to rain or wet conditions.
Stay alert, use common sense. Use personal protective equipment. Prevent unintentional starting. Dress properly.
Wear ear protectors. Use auxiliary handle. Hold by insulated gripping surfaces when near wiring.
Machine is intended for heavy chiselling and demolition work, and for driving in and compacting.
Numbering of product features refers to the diagram of the power tool on the graphics page.
The carrying handle can be swivelled to any position. Loosen the knurled nut, rotate, and retighten.
Pull plug before work. Clean tool shank and apply grease. Insert tool into tool holder.
Pull plug before work. Clean tool shank and apply grease. Insert tool into tool holder and lock.
Pay attention to mains voltage. Push on/off switch to position 'I' to start, '0' to stop.
Hold tool firmly with both hands. Handle movement dampens vibrations. Work with moderate pressure.
Only sharp chiselling tools produce good results. Sharpen tools for service life and good work results.
Grind chiselling tools against sanding discs with water. Avoid annealing colouration on cutting edges.
Contact for maintenance, repair, spare parts, and product use advice. Visit www.bosch-pt.com for details.
Contact information for service centers in Cambodia, China, Hong Kong, India, Indonesia, Malaysia, Pakistan, Philippines, Singapore, Thailand.
