To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSH 27 PROFESSIONAL and is the answer not in the manual?
General| Type | Demolition Hammer |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| Cable Length | 4 m |
| Tool Length | 440 mm |
| Tool holder | SDS Max |
Ensures safe operation by maintaining a clean and well-lit workspace and keeping bystanders away.
Guidelines for preventing electric shock, including proper plug use, avoiding grounded surfaces, and using RCDs in wet conditions.
Advises staying alert, using PPE, preventing unintentional starting, and proper dress to avoid injury.
Covers proper tool usage, maintenance, and safe storage to prevent accidents and ensure longevity.
Emphasizes holding the tool firmly with both hands and maintaining a secure stance for better control.
Recommends clamping workpieces securely using devices or a vice for safer operation.
Warns against working with asbestos and advises dust protection and extraction for harmful dusts.
Includes waiting for the tool to stop, avoiding damaged cables, using RCDs, and hearing protection.
Advises checking for hidden utility lines before drilling to prevent fire, shock, or explosion.
Details the machine's purpose for heavy chiselling, demolition, driving, and compacting tasks.
Provides specifications like article number, power input, output, impact rate, tool holder size, and weight.
Lists the main components of the machine, referencing the illustration on the graphics page.
States measured noise levels (sound pressure and power) according to EN 60745, recommending hearing protection.
Provides vibration emission values for chiselling as per EN 60745 and guidance on estimating exposure.
Declares conformity with relevant EU directives and standards, including sound power level specifications.
Step-by-step instructions for inserting and securing tools with and without a shoulder into the tool holder.
Guidance on checking mains voltage and starting the machine, including initial warm-up for low temperatures.
Explains how to operate the On/Off switch and notes the machine's performance at low temperatures.
Advises working with moderate pressure for optimal impact damping.
Stresses the importance of sharp chisels for performance, tool life, and good working results.
Details methods for re-sharpening chisels using grinding wheels, including specific temperature guidelines for forging and hardening.
Recommends keeping the machine clean, checking carbon brushes, and sending for service if issues arise.
Provides crucial safety instructions for connecting a new 3-pin plug, emphasizing correct wire connections and proper disposal of old plugs.
Directs users to the website for exploded views and spare parts information.
Instructs on sorting accessories and packaging for recycling and proper disposal of old power tools in EC countries.
