English | 15
Bosch Power Tools 1 609 92A 19Z | (4.5.15)
Technical Data
Assembly
Battery Charging (Accessory)
Use only the battery chargers listed on the accessories page. Only these bat-
tery chargers are matched to the lithium ion battery of your cordless worklight.
Note: The battery supplied is partially charged. To ensure full capacity of the battery,
completely charge the battery in the battery charger before using your power tool for
the first time.
The lithium-ion battery can be charged at any time without reducing its service life. In-
terrupting the charging procedure does not damage the battery.
The lithium-ion battery is protected against deep discharging by the “Electronic Cell
Protection (ECP)”. When the battery is empty, the cordless worklight is switched off
by means of a protective circuit.
Do not continue to press the On/Off switch after the cordless worklight has
been automatically switched off. The battery can be damaged.
Cordless Worklight GLI VariLED
Article number
3 601 D43 4..
Rated voltage
V= 14,4 18
Lighting duration, approx.
min/Ah 115 135
Luminous flux
lm 420 420
The colour rendition of illuminated objects can be distorted.
Battery
Permitted ambient temperature
– during charging
– during operation
*
and during storage
°C
°C
0...+45
–20...+50
Recommended batteries
GBA 14,4 V..
GBA 18 V ...
GBA 18 V ...W
Recommended chargers
AL 18..
GAL 3680
GAL 18...W**
* Limited performance at temperatures <0 °C
**
only for wireless charging batteries
OBJ_DOKU-31566-005.fm Page 15 Monday, May 4, 2015 5:13 PM
To Next Page
Loading...
