To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GSR 185-LI and is the answer not in the manual?
General| Battery Voltage | 18 V |
|---|---|
| Max Torque | 50 Nm |
| Chuck Capacity | 1.5-13 mm |
| Drill Diameter in Wood | 35 mm |
| Drill Diameter in Steel | 10 mm |
| Screw Diameter | 8 mm |
| Battery Type | Li-Ion |
| Max. Drilling Diameter (wood/steel) | 35/10 mm |
| Number of Speed Settings | 2 |
| Torque (soft/hard) | 20 / 50 Nm |
| Weight excl. battery | 1 kg |
| Max. Torque (soft/hard) | 20 / 50 Nm |
| Weight (without battery) | 1 kg |
| No-load Speed | 0-500/0-1900 rpm |
| No-load Speed (alternative) | 0-500/0-1900 rpm |
Read all safety warnings, instructions, illustrations and specifications provided with this power tool.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Ensure power tool plugs match the outlet and avoid body contact with earthed surfaces.
Stay alert, watch what you are doing, use common sense, and wear personal protective equipment.
Use the correct power tool for your application and maintain it properly.
Follow all safety instructions for drills and screwdrivers, including specific advice for long drill bits.
Hold the power tool securely, secure the workpiece, and be prepared for torque reactions.
Overview of the product's components and their numbering as per the graphic.
The power tool is intended for driving screws and drilling in various materials.
Detailed technical specifications for the GSR 185-LI and GSB 185-LI models.
Instruction to wear ear protection due to noise exposure during operation.
Presents noise emission values and total vibration values determined according to EN 62841-2-1.
Instructions for charging the battery using the specified charger.
Procedure for safely removing the battery from the power tool.
Explanation of the LED indicators on the battery for charge status.
Instructions for inserting battery, setting rotational direction, and operating mode.
How to start and stop the power tool using the switch and the LED worklight.
Covers LED status, speed adjustment, torque preselection, gear selection, and overload protection.
Explains Auto-Lock function and process for changing tools.
Information on how to use the optional belt clip for convenient carrying.
Guidelines for keeping the power tool and ventilation slots clean for safe operation.
Information on how to contact Bosch for service, repair, and spare parts.
Statement of conformity with applicable EU directives and standards for cordless drills/drivers.
Statement of conformity with applicable UK regulations and standards for cordless drills/drivers.
