6 | English
2 609 932 731 | (29.10.09) Bosch Power Tools
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Screwdriver bit*
2 Stop bushing
3 Adjustment sleeve for screwing-depth stop
4 Screwing-depth stop
5 Belt clip
6 Lock-on button for On/Off switch
7 On/Off switch
8 Rotational direction switch
9 Handle (insulated gripping surface)
10 Universal bit holder*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Assembly
Changing the Tool (see figure A)
f Before any work on the machine itself, pull
the mains plug.
Pull off the screwing-depth stop 4 toward the
front. Pull out the screwdriver bit 1. If required,
the universal bit holder 10 can also be pulled off
and replaced.
After changing the tool, reattach the screwing-
depth stop 4.
Operation
Starting Operation
f Observe correct mains voltage! The voltage
of the power source must agree with the
voltage specified on the nameplate of the
machine.
Reversing the Rotational Direction
The rotational direction switch 8 is used to re-
verse the rotational direction of the machine.
However, this is not possible with the On/Off
switch 7 actuated.
Screwdriver GSR 6-25 TE
Professional
GSR 6-45 TE
Professional
Article number
3 601 D41 3.. 3 601 D40 3..
Rated power input
W 701 701
Output power
W 327 327
No-load speed
min
-1
0–2500 0–4500
Rated speed
min
-1
0–1700 0–3000
Tool holder
¼" hexagon socket ¼" hexagon socket
Max. screw dia.
mm 6 6
Weight according to EPTA-Procedure 01/2003
kg 1.5 1.4
Protection class
/II /II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
OBJ_BUCH-269-003.book Page 6 Thursday, October 29, 2009 12:56 PM
To Next Page
Loading...
