English | 15
Bosch Power Tools 2 609 932 680 | (3.9.09)
Mounting and Operation
Maintenance and Cleaning
Clean the saw blade holder regularly. For this,
remove the saw blade from the machine and
lightly tap out the machine on a level surface.
Check the guide roller regularly. If worn, it must
be replaced through an authorised Bosch after-
sales service agent.
Lubricate the guide roller occasionally with a
drop of oil.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
After-sales Service and Cus-
tomer Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
Action Figure Page
Inserting the Saw Blade A 110
Ejecting the Saw Blade B 110
Switching on the blower C 110
Connecting the dust extraction D 111 – 112
Adjusting the Cutting Angle E 112 –113
Mounting the sliding shoe F 114
Mounting the splinter guard G 114
Orbital Action Settings H 115
Adjusting the stroke rate preselection I 115
Switching On and Off J 116
Lubrication when cutting metal K 117
Plunge Cutting L 117
Mounting and use of the parallel guide M 117 – 118
Selecting accessories – 119 – 120
OBJ_DOKU-19156-001.fm Page 15 Thursday, September 3, 2009 9:12 AM
To Next Page
Loading...
Need help?
General
