-9-
Battery Packs / Chargers:
Please refer to the battery/charger list, included with your tool.
NOTE: For tool specifications refer to the nameplate on your tool.
Model Number GST18V-50
Voltage rating 18 V
No load speed 0–3,500
Permitted battery temperature
during charging
+32…+113°F (0…+45°C)
Permitted ambient temperature
during operation and storage
-4…+122°F (-20…+50°C)
Recommended ambient
temperature during charging
+32…+95°F (0...+35°C)
Maximum Capacities
Stroke length 1-1/32” (26 mm)
Wood 4-59/64” (125 mm)
Aluminum 25/32” (20 mm)
Mild steel 25/64” (10 mm)
Functional Description and Specifications
Assembly
Disconnect battery pack from tool or place the switch in the locked or off posi-
tion before making any assembly, adjustments or changing accessories. Such
preventive safety measures reduce the risk of starting the tool accidentally.
Inserting and Releasing
Battery Pack
To insert the battery pack:
1. Set switch lock (Figure 1, 5) to the locked
position.
2. Slide charged battery pack (Figure 1, 8) into
the housing until the battery pack locks into
position.
Your tool is equipped with a secondary locking
latch to prevent the battery pack from complete-
ly falling out of the handle, should it become
loose due to vibration.
To remove the battery pack:
1. Press the battery pack release button (Fig-
ure 1, 9) and slide the battery pack (Figure
1, 8) forward.
2. Press the battery pack release button (Fig-
ure 1, 9) again and slide the battery pack
(Figure 1, 8) completely out of tool housing.
The jigsaw is intended for making straight, curved or intricate cuts in various materials using suitable
blades. The jigsaw is only intended for handheld, supervised use. For indoor use only.
Intended Use
160992A7EF_GST18V50_202203.indd 9 3/25/22 11:47 AM
To Next Page
Loading...
