Bosch GTM 12 JL Professsional User Manual

Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
Germany
www.bosch-pt.com
1 609 92A 0BP (2013.07) PS / 486 EURO
GTM 12 JL Professional
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководство по
эксплуатации
uk Оригінальна інструкція з
експлуатації
kk Пайдалану нұсқаулығының
түпнұсқасы
ro Instrucţiuni originale
bg Оригинална инструкция
mk Оригинално упатство за работа
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
ar
fa
ςТЎϩХʉ ЌТϾϦφЍʉ ʌμВТЎϺυ
ΖЎϩʉ ˒μВЖЙʉʓ ИͳϞφЁʑ
OBJ_BUCH-1688-004.book Page 1 Tuesday, July 9, 2013 11:57 AM
Ташев-Галвинг ООД
www.tashev-galving.com

Bosch GTM 12 JL Professsional Specifications

General

Brand	Bosch
Model	GTM 12 JL Professsional
Category	Saw
Language	English

Summary

General Power Tool Safety Warnings

Electrical Safety

Precautions regarding power supply, plugs, cords, and water.

Personal Safety

Advice on staying alert, using PPE, and preventing accidents.

Combination Saw Safety Warnings

Safety Warnings for Use as a Chop and Mitre Saw

Safety Warnings for Use as a Table Saw

Product Description and Specifications

Product Features

Chop and Mitre Saw Features

Table Saw Features

Technical Data

Assembly and Transport

Mounting to a Working Surface

Mounting Individual Components

Changing the Saw Blade

Removing the Saw Blade

Step-by-step guide to safely remove the saw blade.

Operation as Chop and Mitre Saw

Working Position

Clamping the Workpiece

Adjusting Mitre and Bevel Angles

Adjusting Standard Mitre Angles

Starting Operation

Working Advice

General Sawing Instructions

Position of the Operator

Permissible Workpiece Dimensions

Sawing

Cutting Off

Steps for performing cross cuts on workpieces.

Checking and Adjusting the Basic Adjustment

Adjusting the Laser

Steps to align the laser beam for accurate cutting marks.

Adjusting the Clearance Indicator of the Parallel Guide

Adjusting the Parallelism

Aligning the laser beam to be parallel with the cutting line.

Adjusting the Tension Force of the Parallel Guide

Adjusting the Flush Levelling

Fine-tuning the laser beam to be flush with the cutting line.

Setting the Standard Bevel Angle 45° (Vertical)

Setting the Standard Bevel Angle 33.9° (Vertical)

Operation as Table Saw

Adjusting the Saw Blade Height

Adjusting the saw blade height for safe operation.

Adjusting the Parallel Guide

Maintenance and Service

Maintenance and Cleaning