To Next PageTo Next Page
Need help?Do you have a question about the Bosch GCM 12 SD Professional and is the answer not in the manual?
General| Blade diameter | 305 mm |
|---|---|
| Blade bore | 30 mm |
| Cutting capacity 0° | 120 mm |
| Laser guide | Yes |
| Max Cutting Depth at 90° | 120 mm |
| Type | Miter Saw |
| No-load speed | 3, 800 rpm |
| Bevel setting | 47° left / 47° right |
| Mitre setting | 52° left / 60° right |
Read all safety warnings and instructions to prevent electric shock, fire, or serious injury.
Ensures safe use by matching plugs, avoiding grounded surfaces, and protecting from water.
Stay alert, use protective equipment, prevent unintentional starting, and dress properly.
Avoid contact with the saw blade during operation to prevent injury.
Ensure workpieces are secured for safe cutting and prevent hand injury.
Stop machine before clearing debris to prevent injury.
Warns against using faulty blades that can cause binding and kickback.
Ensures safety by preventing injuries from the saw blade.
Symbol indicating the need for hearing protection due to noise exposure.
Symbol indicating the necessity of wearing eye protection.
Symbol indicating a danger zone where body parts should not be placed.
Visual guide on how to adjust the tool's handle for user comfort.
Visual guide demonstrating the process of adjusting the bevel angle.
Explanation of the locking lever's function for securing the tool arm and bevel angle.
Defines the specific applications and limitations of the power tool.
Lists and describes the main components and parts of the power tool.
Specific technical data for the sliding mitre saw model.
Details on the specifications for compatible saw blades.
Instruction to wear hearing protection due to significant noise levels.
Critical safety step to disconnect power before assembly.
Lists the components included in the product packaging.
Instructions for installing and using the locking knob for safety.
Guidance on securing the machine to a workbench or stable surface.
Information on health risks from dust and recommendations for extraction.
Step-by-step guide for safely removing the saw blade.
Step-by-step guide for safely installing a new saw blade.
Essential safety steps like unplugging and wearing gloves before changing tools.
Procedure for starting the machine using the On/Off switch.
Procedure for stopping the machine by releasing the On/Off switch.
How to extend the saw table for longer workpieces.
Guidance on securely clamping workpieces for safe and accurate cuts.
How to use detents for quick adjustment of common mitre angles.
Method for setting any mitre angle within the tool's range.
Steps to set bevel angles from 45° to 0° using the left fence extension.
Steps to set bevel angles from 0° to 45° using the right fence extension.
Simple method for resetting the bevel angle to the standard 0° position.
Describes two methods for sawing profile strips: against the fence or flat on the table.
Detailed table for sawing floor strips/mouldings under various settings.
Steps to set the machine to the standard 0° vertical bevel angle.
Steps to set the machine to the standard 45° leftward bevel angle.
How to readjust the clamping force of the lever for secure holding.
Steps to ensure the horizontal angle indicator is correctly aligned with the scale.
Procedure to align the fence for accurate and square cuts.
Guidelines for securing the machine and using proper carrying methods.
General instructions for keeping the tool clean and functional.
Specific cleaning procedures for tool parts like ventilation slots and rollers.
Specific disposal directive for EC countries regarding electrical waste.
