To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GCM 18V-216 D and is the answer not in the manual?
General warnings for power tool safety, including shock, fire, and injury prevention.
Guidelines for maintaining a safe and clean work environment to prevent accidents.
Precautions related to electrical hazards, grounding, and wet conditions.
Measures to ensure operator alertness, proper PPE use, and prevent unintentional starting.
Best practices for operating the tool correctly and maintaining its condition for safety.
Specific safety precautions and warnings applicable to mitre saw operation.
Step-by-step guide to safely remove the saw blade.
Instructions for installing a new saw blade, ensuring correct orientation.
Essential guidelines for safe and effective sawing operations.
Technique for cutting wider workpieces using the slide function.
Method for cutting smaller workpieces without using the slide function.
Instructions for powering on the tool safely using the lock-off button.
Procedure for turning off the power tool by releasing the switch.
General| Battery Voltage | 18 V |
|---|---|
| Cutting Capacity, 0° | 70 x 270 mm |
| Cutting Capacity, 45° Mitre | 70 x 190 mm |
| Cutting Capacity, 45° Bevel | 45 x 270 mm |
| Saw Blade Diameter | 216 mm |
| Blade Bore | 30 mm |
| No-load Speed | 4, 500 rpm |
| Mitre Setting | 47° L / 47° R |
| Cutting Depth at 90° | 70 mm |
| Cutting Depth at 45° | 45 mm |
| Battery Type | Li-Ion |
