Bosch GCM 10 SD User Manual

* Des idées en action.
Bedienungsanleitung
Operating instructions
Instructions d’emploi
Instrucciones de servicio
Manual de instruções
Istruzioni d’uso
Gebruiksaanwijzing
Betjeningsvejledning
Bruksanvisning
Brukerveiledningen
Käyttöohje
Οδηγία χειρισµού
Kullanım kılavuzu
GCM 10 SD
PROFESSIONAL
50
45
1
2
1
2
1
2
10
8
1
2
6
1
2
4
1
2
2
0
1
2
40
35
30
2
5
20
15
10
5
0
60
55
50
15
22,5
30
3
3
,5
45
o

Bosch GCM 10 SD Specifications

General

Brand	Bosch
Model	GCM 10 SD
Category	Saw
Language	English

Summary

General Safety Rules

Electrical Safety Precautions

Ensure correct voltage, avoid earthed surfaces, protect from rain/wet conditions.

Personal Safety Measures

Stay alert, dress properly, avoid accidental starting, use safety equipment.

Specific Safety Rules

Workpiece Handling and Clamping

Ensure work pieces are firmly clamped and supported for safe operation.

Blade and Hand Safety

Keep hands away from the blade and ensure correct blade speed before cutting.

Material and Environmental Safety

FUNCTION

Intended Use

Describes the tool's purpose for straight cuts, mitre, and bevel angles.

Product Specifications

OPERATING INSTRUCTIONS

Mounting Methods

Saw Blade Mounting Procedure

Instructions for installing a new saw blade, including directional checks.

Work Piece Clamping

Methods for securely holding the workpiece using the quick action clamp.

Standard Angle Settings

Dust and Chip Extraction Systems

Horizontal Mitre Angle Adjustment

Adjusting the horizontal angle of the saw table.

Transport Safety Guidelines

Fence Adjustments and Extensions

Vertical Bevel Angle Adjustment

Adjusting the vertical angle of the saw arm.

Securing and Releasing for Transport

Saw Table Extension

Setting Bevel Angle Ranges

Saw Blade Replacement

Detailed steps for removing and installing the saw blade.

Working Instructions

General Sawing Practices

General advice for safe sawing operations, avoiding blade contact.

Cutting Operations (Slide vs. No Slide)

Floor Moulding Cutting Guide

Hand Positioning and Work Piece Dimensions

Correct hand placement and table of maximum work piece dimensions.

Depth Stop Adjustment

Ceiling Moulding Cutting Guide

Profile Moulding Techniques

Checking and Adjusting Basic Adjustment

Vertical Bevel Angle Calibration

Checking and adjusting 0° and 45° vertical bevel angles.

Horizontal Angle Indicator Adjustment

Clamping Force Adjustment

Fence Alignment Check

MAINTENANCE AND SERVICE

Tool Maintenance and Cleaning

Instructions for keeping the tool clean and functional.

Service and Spare Parts