Why does my Bosch GTR55-85 Sander jolt across the surface?
Your Bosch Sander may jolt across the surface because the suction effect is too strong, or the joint compound material and/or substrates are hard. To resolve this, reduce the suction power or switch to external dust extraction. Also, you may need to reduce the speed.
Guidelines for safe use of power and avoiding electric shock.
Staying alert, using PPE, and preventing accidental starts.
Safe grip, cord management, lock-on button awareness, and workpiece securing.
Proper accessory changes, pad speed limits, and sandpaper compatibility.
Dust protection, chemical hazards, and prohibition of wet sanding.
Awareness of health risks from dust and chemicals.
Specifies the tool's purpose for drywall sanding and finishing.
How to adjust the tool's speed for optimal performance.
To Next Page
General
