Bosch GWB 10 RE Professional - Functional Description; Technical Data and Safety Information; Technical Specifications; Noise and Vibration Information

English | 13
Bosch Power Tools 1 609 929 M44 | (14.10.08)
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The machine is intended for drilling in wood,
metal, ceramic and plastic, especially at hard to
reach locations. Machines with electronic speed
control and right/left rotation are also suitable
for screwdriving and thread tapping.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Rotational direction switch
2 Thumbwheel for speed preselection
3 Chuck key
4 On/Off switch
5 Key type drill chuck
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 80 dB(A);
Sound power level 91 dB(A). Uncertainty
K=3dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
a
h
=2.2 m/s
2
, Uncertainty K=1.5 m/s
2
,
Screwdriving: Vibration emission value
a
h
=2.9 m/s
2
, Uncertainty K=1.5 m/s
2
,
Tapping: Vibration emission value a
h
<2.5 m/s
2
,
Uncertainty K=1.5 m/s
2
.
Angle Drill GWB 10 RE
Professional
Article number
0 601 132 7..
Rated power input
W 400
No-load speed
min
-1
0–1300
Rated speed
min
-1
0–750
Rated torque
Nm 2.2
Chuck clamping range
mm 10
Max. drilling dia.
– Steel
–Aluminium
– Wood
mm
mm
mm
10
12
22
Weight according to
EPTA-Procedure
01/2003
kg 1.6
Protection class
/II
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
OBJ_BUCH-493-002.book Page 13 Tuesday, October 14, 2008 12:35 PM