To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSB 10 RE and is the answer not in the manual?
General| Power Input | 500 W |
|---|---|
| No-load Speed | 0 - 2600 rpm |
| Chuck Capacity | 1.5 - 10 mm |
| Drilling Diameter in Concrete | 10 mm |
| Drilling Diameter in Wood | 20 mm |
| Drilling Diameter in Steel | 8 mm |
| Weight | 1.5 kg |
| Impact Rate | 0 - 41600 bpm |
| Tool Dimensions | 262 x 253 mm |
Read all safety warnings and instructions. Failure to follow may result in electric shock, fire, or injury.
Keep work area clean and well lit. Do not operate in explosive atmospheres. Keep bystanders away.
Ensure proper plugs match outlets, avoid body contact with earthed surfaces, and protect from rain or wet conditions.
Stay alert, use common sense, wear personal protective equipment, and prevent unintentional starting.
Do not force the tool, use correct tool, maintain tools, keep cutting tools sharp, and store idle tools safely.
Machine is for impact drilling in brick, concrete, stone, and drilling in wood, metal, plastic.
Lists and describes the numbered components of the power tool shown in illustrations.
Provides technical specifications like rated power, output power, speed, and impact rate for different models.
Ensure correct mains voltage and follow procedures for starting the machine.
Instructions for starting, locking, and switching off the power tool.
