To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSB 1600 RE Professional and is the answer not in the manual?
General| Drilling | Yes |
|---|---|
| Chuck type | Keyless |
| Screwdriving | - |
| Product design | Pistol grip drill |
| Input power | 701 W |
| Output power | 351 W |
| Power source | AC |
| AC input voltage | 110 V |
| Spindle thread | 1/2\ |
| Number of gears | 1 |
| Idle speed (max) | 3000 RPM |
| Idle speed (min) | 0 RPM |
| Sound power level | 109 dB |
| Chuck capacity (max) | 13 mm |
| Chuck capacity (min) | 1.5 mm |
| Sound pressure level | 98 dB |
| Impact rate (low speed) | 0 bpm |
| Sound level uncertainty | 3 dB |
| Impact rate (high speed) | 48000 bpm |
| Drilling diameter in wood (max) | 30 mm |
| Drilling diameter in steel (max) | 12 mm |
| Drilling diameter in stone (max) | 18 mm |
| Vibration level (metal drilling) | 1.5 m/s² |
| Drilling diameter in concrete (max) | 16 mm |
| Vibration level (concrete drilling) | 3.5 m/s² |
| Vibration level uncertainty (screwdriving) | 2.5 m/s² |
| Vibration level uncertainty (metal drilling) | 2.7 m/s² |
| Vibration level uncertainty (concrete drilling) | 23 m/s² |
Weight and Dimensions| Width | 295 mm |
|---|---|
| Height | 195 mm |
| Weight | 1900 g |
| Package depth | 340 mm |
| Package width | 285 mm |
| Package height | 10 mm |
Ensure proper grounding, avoid wet conditions, and protect the power cord from damage.
Stay alert, use PPE, prevent unintentional starting, and maintain proper footing and balance.
Details article number, power input, output, speed, impact rate, torque, and chuck range.
Specifies maximum drilling diameters for brickwork, concrete, steel, and wood.
Presents sound pressure and power levels with uncertainty, advising hearing protection.
Details vibration values for metal drilling, concrete impact drilling, and screwdriving.
Guidelines for connecting to power, starting, switching off, and locking the tool.
Instructions for variably adjusting speed/impact rate and preselecting it.
Important safety instructions for connecting a new 3-pin plug to the 2-wire cable.
