To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSB 16 RE and is the answer not in the manual?
General| Power Input | 750 W |
|---|---|
| No-load Speed | 0 - 2800 rpm |
| Drilling Diameter in Concrete | 16 mm |
| Drilling Diameter in Wood | 30 mm |
| Chuck Capacity | 1.5 - 13 mm |
| Impact Rate at No-load Speed | 0 - 44800 bpm |
| Drilling Capacity in Masonry | 16 mm |
Read all safety warnings and instructions to prevent electric shock, fire, and serious injury.
Maintain a clean and well-lit work area, avoid explosive atmospheres, and keep bystanders away.
Ensure proper grounding, avoid contact with earthed surfaces, and protect from rain or wet conditions.
Stay alert, use PPE, prevent unintentional starting, and maintain proper footing and balance.
Use the correct tool, do not force it, disconnect power before adjustments, and maintain tools.
Wear ear protection, use auxiliary handles, and be cautious of hidden wiring and workpiece jamming.
Machine for impact drilling in brick, concrete, stone, and drilling in wood, metal, plastic.
Overview of the machine's components, referencing the illustration on the graphics page.
Detailed specifications including power input, speed, impact frequency, and drilling capacities.
Ensure correct mains voltage and observe safety before starting the machine.
Instructions on actuating the rotational direction switch when the machine is at a standstill.
Switching between drilling, screwdriving, and impact drilling modes using the selector switch.
How to start, stop, and lock the On/Off switch for continuous operation.
Variable speed control by adjusting pressure on the On/Off switch.
Using the thumbwheel to set the desired speed or impact frequency.
Tips for efficient and safe operation, including cooling down and using correct drill bits.
Keep the machine clean and ensure proper ventilation; cord replacement must be done by professionals.
Information on obtaining spare parts, service, and application advice from Bosch.
Instructions for environmentally friendly recycling of the machine, accessories, and packaging.
