To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSB 19-2 RE and is the answer not in the manual?
Read all safety warnings, instructions, illustrations and specifications.
Keep work area clean and well lit. Avoid explosive atmospheres.
Ensure power tool plugs match the outlet. Avoid body contact with earthed surfaces.
Stay alert, wear eye protection, prevent unintentional starting.
Wear ear protectors, use auxiliary handle, hold by insulated surfaces.
Never operate at higher speed than drill bit rating. Start drilling at low speed.
Switch off if blocked, hold securely, secure workpiece, use detectors.
For impact drilling in brick, concrete, stone, wood, metal, ceramic and plastic.
Refers to numbered diagrams of power tool features.
Specifications like power input, speed, torque, and drilling diameters.
Attach and adjust auxiliary handle for safe posture.
Set required drilling depth using the depth stop.
Instructions for changing tools in the keyless chuck.
Instructions for changing tools in the keyless chuck.
Instructions for changing tools in the keyed chuck.
Pay attention to mains voltage. Use RCD for damp locations.
Change rotational direction switch when the power tool is not in use.
Set selector switch to drilling or impact drilling symbol.
Select speed ranges by pressing the gear selector switch.
Press and hold the on/off switch to start; lock-on button for continuous operation.
Adjust speed/impact rate by varying pressure on the on/off switch.
Use speed preselection thumbwheel to set speed/impact rate.
Tips for drilling tiles, working with concrete, and metal.
Keep tool and ventilation slots clean. Cord replacement by authorized service.
General