To Next PageTo Next Page
Need help?Do you have a question about the Bosch GWS 20-180 H Professional and is the answer not in the manual?
Read all safety warnings and instructions. Failure to follow may result in electric shock, fire, or serious injury.
Power tool plugs must match outlet. Never modify plug. Do not use adapter plugs with earthed tools.
Stay alert, use common sense. Do not use while tired or under influence of drugs/alcohol. Wear PPE. Prevent unintentional starting.
Read all warnings. Do not polish. Use recommended accessories. Match accessory speed and size. Do not use damaged accessories.
Kickback is sudden reaction to pinched/snagged accessory. Maintain firm grip, position body to resist. Never place hand near accessory.
Use recommended wheels/guards. Mount wheels correctly. Attach guard securely. Use wheels for recommended applications.
Do not "jam" wheel or apply excessive pressure. Do not position body in line with wheel. Hold tool motionless if binding.
Pull plug before work. Note if guard is damaged. Place protective guard on spindle collar. Adjust position.
Pay attention to mains voltage. Hold by insulated gripping surfaces. Check generator suitability. Use RCD for AUS/NZ.
Push switch forward and down to start. Push further to lock. Release to stop. Briefly press to stop locked switch.
Pull plug before work. Keep tool and vents clean. Use dust extractor in extreme conditions. Blow out vents. Install RCD.
General