To Next PageTo Next Page
Need help?Do you have a question about the Bosch GWS 22-230 H Professional and is the answer not in the manual?
General| Input power | 2200 W |
|---|---|
| Output power | 1500 W |
| Power source | AC |
| Product color | Aluminium, Black, Blue, Red |
| Adjustable speed | No |
| Adjustable protective guard | Yes |
| Idle speed (max) | 6500 RPM |
| Sound power level | 93 dB |
| Sound pressure level | 104 dB |
| Grinding disc diameter | 230 mm |
| Sound level uncertainty | 3 dB |
| Vibration level (sanding) | 3.5 m/s² |
| Vibration level (grinding) | 7.5 m/s² |
| Vibration level uncertainty (grinding) | 1.5 m/s² |
Weight and Dimensions| Depth | 515 mm |
|---|---|
| Height | 140 mm |
| Weight | 5200 g |
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
This power tool is intended to function as a grinder, sander, wire brush or cut-off tool. Read all safety warnings, instructions, illustrations and specifications provided with this power tool.
Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush or any other accessory.
The power tool is intended for cutting, roughing and brushing metal and stone materials without the use of water.
Angle grinder specifications including article number, power input, power output, speed, disc diameter, spindle thread, weight.
Pull the plug out of the socket before carrying out any work on the power tool. Do not touch grinding and cutting discs until they have cooled down.
You can use all the abrasive tools mentioned in these operating instructions. The permissible speed [rpm] or the circumferential speed [m/s] of the abrasive tools used must at least match the values given in the table.
Pay attention to the mains voltage. The voltage of the power source must match the voltage specified on the rating plate of the power tool.
To start the power tool, push the on/off switch (2) forward and then press it down.
The power tool is fitted with the Bosch Brake System, a patented electromechanical run-out brake.
