Bosch GWS Professional 18V-125 SC User Manual

Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 2U4 (2016.10) O / 464
GWS Professional
18V-100 C | 18V-115 C | 18V-125 C |
18V-100 SC | 18V-115 SC | 18V-125 SC | 18V-150 SC
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководство по
эксплуатации
uk Оригінальна інструкція з
експлуатації
kk Пайдалану нұсқаулығының
түпнұсқасы
ro Instrucţiuni originale
bg Оригинална инструкция
mk Оригинално упатство за работа
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
ko 사용 설명서 원본
ar
fa
ςТЎϩХʉ ЌТϾϦφЍʉ ʌμВТЎϺυ
ΖЎϩʉ ˒μВЖЙʉʓ ИͳϞφЁʑ
OBJ_DOKU-54310-002.fm Page 1 Friday, October 21, 2016 1:27 PM

Bosch GWS Professional 18V-125 SC Specifications

General

Battery Voltage	18V
Disc Diameter	125 mm
No-load Speed	4, 500 – 9, 000 rpm
Brushless Motor	Yes
Connectivity	Yes
Spindle Thread	M14
Battery Type	Lithium-ion

Summary

Electrical Safety

Personal Safety

Power Tool Use and Care

Battery Tool Use and Care

Safety Warnings for Angle Grinder

Safety Warnings Common for Grinding, Sanding, Wire Brushing or Abrasive Cutting Off Operations

General safety precautions applicable to various grinding and cutting operations.

Kickback and Related Warnings

Explains kickback and how to prevent it during operation.

Safety Warnings Specific for Grinding and Abrasive Cutting-Off Operations

Additional Safety Warnings Specific for Abrasive Cutting Off Operations

Safety Warnings Specific for Sanding Operations

Safety Warnings Specific for Wire Brushing Operations

Technical Data

Mounting the Protective Devices

Protective Guards and Guides

Instructions for mounting various protective guards and cutting guides.

Hand Guard

Mounting Grinding Tools and Accessories

Operation

Starting and Switching

Safety Features

Explanation of kickback stop, restarting protection, and impact shutdown.

User Interface