To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GWS 18V-15 SC and is the answer not in the manual?
General| Battery Voltage | 18 V |
|---|---|
| Disc Diameter | 125 mm |
| Brushless Motor | Yes |
| KickBack Control | Yes |
| Bluetooth Connectivity | Yes |
| Spindle Thread | M14 |
| Wheel Diameter | 125 mm |
| Battery Type | Li-ion |
| No-load Speed | 3, 400 – 11, 000 rpm |
Guidelines for cleaning and maintaining the power tool and its accessories.
Information on repair, spare parts, and product application support.
Maintaining a safe and hazard-free work environment during operation.
Precautions for power source connection, plugs, and avoiding electrical hazards.
Operator alertness, protective equipment use, and preventing accidental starts.
Instructions for proper tool operation, maintenance, and safe storage.
Guidelines for safe battery charging, usage, and maintenance.
Specific safety precautions for various abrasive operations.
Detailed safety advice for grinding and cutting tasks.
Specific safety instructions pertinent to sanding applications.
Safety guidelines when using wire brushes with the tool.
General safety notes and recommendations not covered elsewhere.
Proper techniques to avoid and control kickback during operation.
Continued safety advice for grinding, cutting, sanding, and wire brushing.
Overview of the tool's components and their corresponding numbers.
Detailed technical data for different angle grinder models.
Measured vibration levels for different sanding applications.
Instructions for installing and using the Bluetooth module.
How to fit and adjust the protective guard for grinding.
Guidance on fitting the protective guard for cutting operations.
Instructions for attaching extraction guards for cutting and sanding.
Information on the benefits and use of the low-vibration auxiliary handle.
Guidance on fitting and using the hand guard with accessories.
Steps for securely fitting grinding and cutting discs.
Instructions for attaching and using a flap disc.
How to attach sanding pads, cup brushes, and disc brushes.
Guidance on using carbide grinding heads with a suitable guard.
How to insert the battery and operate the tool's on/off switch.
Features that interrupt operation during kickback or power interruption.
How the tool switches off if it hits the floor.
Using the interface to preselect speed and view status.
Interpreting LED indicators for battery charge and tool temperature.
Understanding power tool status indicators and connectivity functions.
Specific guidance for cutting stone materials safely and effectively.
Procedures for keeping the tool and accessories clean and in good working order.
How to access customer support for repairs, spare parts, and advice.
