Bosch Professional GWS 18V-125 PSC User Manual

Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 47G (2017.11) AS / 382
GWS Professional
18V-125 PSC | 18V-125 PC
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήση
tr Orijinal işletme talimatı
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководство по
эксплуатации
uk Оригінальна інструкція з
експлуатації
kk Пайдалану нсаулыыны
тпнсасы
ro Instrucţiuni originale
bg Оригинална инструкция
mk Оригинално упатство за работа
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
OBJ_BUCH-3458-001.book Page 1 Wednesday, November 15, 2017 10:48 AM

Bosch Professional GWS 18V-125 PSC Specifications

General

Battery Voltage	18 V
Disc Diameter	125 mm
No-load Speed	4, 500 – 9, 000 rpm
Switch	Paddle switch
Spindle Thread	M14
Bore Size, Diameter	22.23 mm
Battery Type	Li-ion
Power Input	Not applicable (cordless)

Summary

Safety Notes

General Power Tool Safety Warnings

Read all safety warnings and instructions. Failure to follow may result in electric shock, fire, or injury.

Safety Warnings for Angle Grinder

Safety Warnings common for Grinding, Sanding, Wire Brushing or Abrasive Cutting Off Operations

Safety guidelines for common angle grinder operations like grinding and sanding.

Kickback and related warnings

Explains kickback and provides precautions to avoid it.

Safety warnings specific for Grinding and Abrasive Cutting-Off operations

Specific safety instructions for grinding and abrasive cutting tasks.

Product Description and Specifications

Intended Use

Product Features

Technical Data

Noise/Vibration Information

Assembly

Battery Charging

Guidance on how to charge the tool's battery pack and check its status.

Mounting the Protective Devices

Instructions for fitting protective guards, cutting guides, and handles.

Mounting the Grinding Tools

Approved Grinding Tools

Operation

Starting Operation

Steps for inserting the battery and switching the power tool on and off.

Kickback stop

Explanation of the kickback control feature and how to restart after activation.

Restarting Protection

Details on the restart protection feature that prevents uncontrolled re-starting.

Working Advice

Rough Grinding

Cutting Metal

Cutting Stone (see figure C)

Maintenance and Service

Maintenance and Cleaning