To Next PageTo Next Page
Need help?Do you have a question about the Bosch GWX10-45E and is the answer not in the manual?
General| Weight | 2.3 kg |
|---|---|
| Wheel Diameter | 4 1/2 in |
| Disc diameter | 115 mm |
| No-load speed | 11000 rpm |
| Rated Input Power | 1000 W |
Keep the work area clean, well-lit, and free of non-operational personnel.
Use correct plugs, avoid earthed surfaces, and use GFCI in damp locations.
Stay alert, use common sense, and avoid operating under influence of impairing substances.
Guidelines for servicing power tools, recommending qualified repair personnel.
General safety advice applicable to multiple operations like grinding and sanding.
Understanding and preventing kickback, a sudden reaction to accessory binding.
Further safety advice for abrasive cutting tasks, including material and wheel selection.
Safety guidelines tailored for sanding operations, including disc selection.
General additional safety advice not specific to one operation type.
Instructions for attaching and using the side handle for control and balance.
Guidance on using the hand shield for finger and hand protection during operation.
Detailed steps for attaching X-Lock accessories to the tool, ensuring proper engagement.
Steps for installing Type 41/1A cutting wheels with the correct guard.
Steps to install wire wheels, including guard adjustment.
Steps to rotate the gear housing for proper switch orientation during assembly.
Steps for installing a dry diamond wheel, following guard instructions.
How to operate the paddle switch, including lock-off and lock-on features.
Instructions for using the slide switch, including lock-on functionality.
Procedures and safety precautions for metal cutting tasks using the grinder.
Guidelines for servicing power tools, recommending qualified repair personnel.
Information on tool lubrication, recommending regreasing gears at brush changes.
Precautions regarding cleaning agents and keeping ventilation openings clear.
Guidelines for storing accessories and performing pre-use checks for damage.
Recommendations for selecting and using appropriate extension cords for the tool.
