Bosch GWX13-50 User Manual

For English Version
See page 2
Version française
Voir page 30
Versión en español
Ver la página 59
IMPORTANT
Read Before Using
IMPORTANT
Lire avant usage
IMPORTANTE
Leer antes de usar
Operating / Safety Instructions
Consignes d’utilisation / de sécurité
Instrucciones de funcionamiento y seguridad
Call Toll Free for Consumer Information & Service Locations
Pour obtenir des informations et les adresses de nos centres de service après-vente, appelez ce numéro gratuit
Llame gratis para obtener información para el consumidor y ubicaciones de servicio
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
GWX13-50
GWX13-50VSP
GWX13-60
GWX13-60PD
GWX 15-125 PS

Bosch GWX13-50 Specifications

General

Power	1300 W
Disc diameter	125 mm
No-load speed	11000 rpm
Cord Length	2.5 m
Electronic Feedback	Yes
Spindle Lock	Yes
Wheel Diameter	125 mm
Cable length	2.5 m

Summary

Safety Symbols and General Power Tool Warnings

Work Area, Electrical, and Personal Safety

Key safety practices for the work environment, electrical connections, and personal conduct.

General Power Tool Safety Practices

PPE, Operation, and Maintenance

Using PPE, preventing accidental starts, proper tool use, and maintenance guidelines.

Power Tool-Specific Safety Warnings

Common Safety for Grinding, Sanding, Wire Brushing, and Cutting

General safety for multiple operations, PPE, accessory checks, and handling precautions.

Kickback and Specific Operation Safety

Kickback Hazards and Prevention

Understanding kickback, causes, and how to avoid it for safe operation.

Grinding and Cutting Safety Precautions

Specific safety for grinding, cutting, and accessory selection.

Operation-Specific Safety Guidelines

Sanding and Wire Brushing Safety

Safety tips for sanding operations and using wire brushes.

Additional Safety and Health Precautions

Tool Handling and Dust Hazard Awareness

Safe tool handling, cleaning, and awareness of hazardous dust during operation.

Functional Description and Specifications

GWX13-50 & GWX13-60 Model Details

Application Guide

Wheel Compatibility for Operations

Basic X-Lock Operation

Tool-Free Accessory Mounting

Explanation of the X-Lock system for fast accessory changes.

Wheel Guard Installation

Attaching and Removing Guards

X-Lock Accessory Mounting and Removal

Securely Mounting X-Lock Accessories

Step-by-step guide for attaching X-Lock accessories correctly.

X-Lock Accessory Removal

Safely Detaching X-Lock Accessories

Instructions for safely removing X-Lock accessories.

Masonry Cutting Guard Assembly

Gearbox Rotation for Masonry Cutting

Operating Instructions: Switches

Paddle Switch Operation

Slide Switch Operation

Metal Grinding and Cutting

Metal Grinding Procedures

Metal Cutting Procedures

Masonry and Concrete Cutting

Cutting Techniques and Safety

Sanding Procedures

Sanding Disc Selection and Technique