Bosch HBG7563B1 - Rapid Heating; Time-Setting Options

en Rapid heating
12
3.
Change the temperature with the setting ring.
4.
To confirm the change, press on the display.
a The change is applied.
8.7 Displaying information
In most cases, you can call up information about the
function that you have just started. The appliance auto-
matically displays certain information, e.g. to ask you to
do/confirm something or to issue a warning.
1.
Press ⁠"Info".
a Information is displayed for a few seconds.
2.
To scroll through lots of content in the message,
swipe over the display.
3.
If necessary, use to exit the message.
8.8 Sabbath-compliant use
If you want to operate your appliance so that it is Sab-
bath-compliant, use the time-setting options and
change the basic setting for the lighting.
Note:If you open the appliance door during operation,
the appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again. To
operate your appliance so that it is Sabbath-compliant,
do not open the appliance door until after operation.
1.
Change the "Lighting" basic setting to "Always off".
→"Basic settings", Page18
This will ensure that the light in the cooking com-
partment is always off while the appliance is in oper-
ation and when you open the appliance door.
2.
Set the required operating mode.
→"Setting the operating mode", Page11
→"Setting the type of heating and the temperature",
Page11
3.
Set the required cooking time depending on the op-
erating mode.
→"Setting the cooking time", Page13
→"Time-setting options", Page12
4.
Use "End time" to set the time at which the opera-
tion should end.
→"Setting the end time", Page13
→"Time-setting options", Page12
5.
Place the food in the cooking compartment before
the appliance starts to heat.
6.
Press to start the operation.
a The display shows the time remaining until the oper-
ation starts. The appliance is in standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
7.
When the operation has ended, remove the food
from the cooking compartment. The appliance auto-
matically switches off completely after approximately
15 to 20minutes.
Note:If necessary, change the basic setting for the
lighting again.
Rapid heating
9 Rapid heating
To save time, rapid heating can shorten the preheat-
ing time for set temperatures over 100°C.
Rapid heating is possible for the following types of
heating:
¡ 4Dhot air
¡ Top/bottom heating
9.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note:Do not set a cooking time until rapid heating has
come to an end.
1.
Set a suitable type of heating and a temperature of
at least 100°C.
Rapid heating automatically switches on at temper-
atures of 200°C and above.
2.
Press "Rapid heating".
a The symbol lights up red.
3.
Press to start the operation.
a Rapid heating starts.
a Once rapid heating has ended, a signal sounds.
The symbol changes back to white.
4.
Place the food in the cooking compartment.
Cancelling rapid heating
1.
Press on the display.
2.
Press "Rapid heating".
a The symbol changes back to white.
Time-setting options
10 Time-setting options
For an operation, you can set the cooking time and the
time at which the operation should be finished. The
timer runs independently of the operation.
Time-setting
option
Use
Cooking time If you set a cooking time, the appli-
ance stops heating automatically
once this time has elapsed.