What to do if the unbalanced load detection system has interrupted the spin cycle on my Bosch Washer/Dryer?
If the unbalanced load detection system in your Bosch Washer/Dryer has interrupted the spin cycle, redistribute the laundry in the drum.
Why is the water not draining from my Bosch Washer/Dryer?
The water might not be draining from your Bosch Washer/Dryer because the drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose to resolve this. Another possible reason is that the drain pipe or water drain hose is caught or jammed; ensure that they are not kinked or trapped. Also, check that the pump cap is fully screwed in, with the handle in a vertical position.
What to do if the Bosch Washer/Dryer programme does not start?
If the programme on your Bosch Washer/Dryer isn't starting, make sure that you have pressed the start button. Also, check that the door is fully closed and that the childproof lock is deactivated. Ensure that the 'Finish in' option is not activated and that no laundry is caught in the door.
How to fix long drying times on my Bosch Washer/Dryer?
If your Bosch Washer/Dryer is taking too long to dry, it could be due to a few factors. If the ambient temperature is greater than 30 °C or there is insufficient air circulation at the appliance's installation location, ventilate the area. Also, if fluff has accumulated in the drum, run the Cottons 90°C programme without any laundry or detergent.
Why Bosch Washer/Dryer spin result is not satisfactory?
If the spin result of your Bosch Washer/Dryer isn't satisfactory and the laundry is too wet, it could be due to a blocked drain pipe or water outlet hose. Clean the drain pipe and the water outlet hose. Also, ensure that the drain pipe or water drain hose isn't caught or jammed. If the unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distributed, redistribute the laundry in the drum.
Why Bosch Washer/Dryer spin programme does not start?
The spin programme on your Bosch Washer/Dryer may not start if the drain pipe or water outlet hose is blocked; clean them to resolve this. Ensure that the drain pipe or water drain hose is not kinked or trapped. If the laundry is unevenly distributed, the unbalanced load detection system may interrupt the spin cycle; redistribute the laundry in the drum.
What to do if my Bosch Washer/Dryer drain pump is blocked?
If the drain pump of your Bosch Washer/Dryer is blocked, ensure that the drain pipe and water drain hose are not kinked or trapped. Also, make sure the pump cover is correctly assembled and that the pump cap is screwed in all the way into the appliance, with the handle in a vertical position. Clean the drain pipe and the water outlet hose if they are blocked. Ensure the water outlet hose is installed at a maximum height of 1 metre and remove any unapproved extensions from the water hose.
What to do if my Bosch Washer/Dryer has detergent residue on the dry laundry?
If you notice detergent residue on the dry laundry from your Bosch Washer/Dryer, it may be due to water-insoluble substances in the detergents. Brush out the laundry after washing and drying to remove the residue.
What to do if my Bosch Washer/Dryer has detergent residue on the damp washing?
If you find detergent residue on the damp washing in your Bosch Washer/Dryer, it's likely due to water-insoluble substances in the detergents. Start the Rinse programme to remove the residue.
Why is my Bosch Washer/Dryer water pressure low?
Low water pressure in your Bosch Washer/Dryer could be due to a few reasons. Try cleaning the water inflow filter. Also, make sure that the tap is turned on and that the water inlet hose is not kinked or jammed.
To Next Page
General