EasyManua.ls Logo

Bosch HBL34 - 30 Appliances

Bosch HBL34
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30" Appliances
Dimensions for 30" Wall-Mounted Units
293/4"
2713/16"
(706ram)
281/2"
'_- (724mm)
24" /------_
(610ram)
(718mm)
i
27"
(686mm)
237/8" (606ram)
!, 22"(559mm)
rain. 43/4"(121mm)
max. 313/8"
l_
Single Oven 30"
It is good practice, when oven is
installed at the end of a cabinet run,
adjacent to a perpendicular wall or
cabinet door, to allow at least 1/4"
space between the side of the oven
and the wall/door.
For oven support, install 2x4's
extending front to back flush with the
bottom and the side of the opening.
The supporting base must be well
secured to the floor/cabinet and level.
Note: The conduit box must be
installed either above or below the
unit. If the conduit box is installed
below the unit, a 2" diameter hole or
space is required between the back
wall and the right rear of the 2x4
supports.
The cabinet base must be flat and
capable of supporting a weight of at
least 190 Ibs (86 kg).
293/4"
k (755mm) 2713/16"
(706ram)
513/4"
(1314mm)
24"
493/4"
(1264mm)
2
237/8" (606ram)
Lj 22" (559mm)
511/8"
(1299mm)
93/4"
(248mm)
s__
Double Oven 30"
It is good practice, when oven is
installed at the end of a cabinet run,
adjacent to a perpendicular wall or
cabinet door, to allow at least 1/4"
space between the side of the oven
and the wall/door.
For oven support, install 2x4's
extending front to back flush with the
bottom and the side of the opening.
The supporting base must be well
secured to the floor/cabinet and level.
Note: The conduit box must be located
above the unit to facilitate connecting
and servicing.
The cabinet base must be fiat and
capable of supporting a weight of at
least 330 Ibs (150 kg).
English 7

Other manuals for Bosch HBL34

Related product manuals