To Next PageTo Next Page
Need help?Do you have a question about the Bosch HBL8x50UC and is the answer not in the manual?
General| Fuel Type | Electric |
|---|---|
| Self-Cleaning | Yes |
| Control Type | Touch Control |
| Wi-Fi Connectivity | Yes |
| Precision Cooking | Yes |
| Temperature Probe | Yes |
| Door Style | French Door |
| Installation Type | Built-In |
| Color | Stainless Steel |
| Weight | 150 lbs |
| Voltage | 240 V |
| Frequency | 60 Hz |
| Oven Capacity | 4.6 cu. ft. |
| Cooking Modes | Bake, Broil, Proof, Warm |
| Interior Light | Yes, Halogen |
| Number of Oven Racks | 3 |
Lists the Bosch 300, 500, and 800 series oven models and their configurations.
Details the various features and options available across different Bosch oven models.
Explains the location and purpose of the unit's data plate, including FD number interpretation.
Outlines the product warranty period and coverage for defects in materials and workmanship.
Describes how oven elements cycle on/off based on cooking mode and preheat.
Explains how to interpret the element duty cycle table for preheating.
Illustrates the sequence of events during oven preheat for various cooking modes.
Details the operation and shut-off behavior of the oven's cooling fans.
Lists components accessible from the front of the oven after partial removal.
Lists components accessible from the top after full removal from the wall.
Lists components accessible from the rear after full removal and back panel removal.
Discusses oven door types and general information.
Provides detailed steps and safety precautions for removing and reinstalling oven doors.
Explains the door latch mechanism, its function, and troubleshooting.
Details the operation of cavity lights based on button presses and oven state.
Guides on replacing halogen and incandescent oven lamps with safety notes.
Explains the function and reset procedure for the High Temperature Cutout.
Describes the convection fan and ring element configuration and usage in different models.
Details how to test the temperature sensor and its resistance readings.
Explains how customers can adjust oven temperature settings for calibration.
Describes the broil element specifications and testing procedures.
Shows variations of user interfaces and how to remove them.
Provides step-by-step instructions for removing the user interface assembly.
Guides on accessing and troubleshooting the PC control module.
Explains the function of the power supply module in providing DC voltage.
Details the halogen light transformer specifications and testing.
Provides instructions for testing the convection fan motor.
Describes how to remove and reinstall the upper oven bake element.
Step-by-step guide for removing the upper oven bake element.
Instructions for reinstalling the upper oven bake element.
Details testing the upper oven cooling fan motor and Hall effect sensor.
Lists error codes, their causes, and recommended actions for troubleshooting.
Explains how to enter service mode and set option codes for module replacement.
Specific steps to enter service mode for HBL3/HBN3 models.
Specific steps to enter service mode for HBL5/HBN5 models.
Specific steps to enter service mode for HBL8 models.
Provides a table of option codes for various Bosch oven models.
Explains how to activate demo mode for display and light testing.
Provides a visual guide for troubleshooting unit behaviors and failures.
Details how to perform specific tests on components using pin headers or open circuits.
Provides a key for identifying wire colors used in wiring diagrams.
Presents strip diagrams for oven elements (bake, broil, ring) for upper and lower cavities.
Refers to additional documents and resources available on QuickFinder for further information.
Provides contact information for Bosch technical support.
